LIGHTING SYSTEM (for Sedan) > DETAILS



FUNCTION
  1. Illuminated Entry System

    1. When any one of the following conditions is satisfied, the illuminated entry system turns on the No. 1 room light assembly:

      1. A door is unlocked through a driver door key operation or transmitter operation*.
      2. Any door is opened.
      3. All doors are closed and the ignition switch is turned from ON to off.
      *: Models with wireless door lock control system

    2. When any one of the following conditions is satisfied, the light will fade out (in approximately 1 second):

      1. After continuing to be on for approximately 15 seconds after all doors have been properly closed.
      2. All doors are closed and driver, front passenger, and rear doors are locked.
      3. All doors are closed and the ignition switch is turned to ACC or ON.

  2. Battery Saving Function

    1. A battery saving function is used to automatically turn the No. 1 room light assembly off, when the following condition occurs continuously for 20 minutes or more:

      1. The ignition key is not in the ignition key cylinder when any door is either ajar or open.