METER / GAUGE SYSTEM (for Sedan) > GENERAL |
| OUTLINE |
An Optitron display type or analog display type combination meter assembly is available. It is located at the upper center of the instrument panel to ensure its visibility.
The Optitron display type combination meter assembly realizes excellent visibility through the use of smoke acrylic in the protective panel, and Light Emitting Diodes (LEDs) that are very bright and have high contrast for illuminating the indicator and dial.
The step-motor is used to actuate the indicators of the speedometer and tachometer.
Liquid Crystal Displays (LCDs) are used for the odometer, trip meter and fuel gauge.
A fuel gauge which displays the amount of remaining fuel in the fuel tank with an 8-segment bar is used.
A meter ECU and multi buzzer are enclosed in the combination meter assembly. This ECU maintains communication with other ECUs through the CAN.

| *1 | Speedometer | *2 | Tachometer |
| *3 | Fuel Gauge | - | - |