AIR CONDITIONING SYSTEM (for Sedan) > GENERAL



OUTLINE
  1. Manual air conditioning is used.


SPECIFICATION
  1. Performance

    Item
    Specification
    Heater
    Heater Output
    W
    4600
    Air Flow Volume
    m3/h
    280
    Power Consumption
    W
    Less Than 170
    Cooler
    Cooling Capacity
    W
    4275
    Air Flow Volume
    m3/h
    420
    Power Consumption
    W
    Less Than 210

  2. Ventilation and Heater Radiator Unit Sub-assembly

    Item
    Specification
    Heater Radiator Unit Sub-assembly
    Type
    Straight Flow Aluminum (SFA)-II
    Size: W x H x L
    mm (in.)
    201.5 x 140 x 27 (7.9 x 5.5 x 1.1)
    Fin Pitch
    mm (in.)
    1.8 (0.07)
    Blower with Fan Motor Sub-assembly
    Motor Type
    K62-11.5T
    Fan Type
    Stabilized Scroll Flow
    Fan Size: Dia. x H
    mm (in.)
    145 x 65 (5.7 x 2.6)

  3. Air Conditioning

    Item
    Specification
    Cooler Condenser Assembly
    Type
    Multi-Flow (MF)-IV (Sub Cool)
    Size: W x H x L
    mm (in.)
    520 x 325.4 x 16 (20.5 x 12.8 x 0.6)
    Fin Pitch
    mm (in.)
    2.75 (0.11)
    No. 1 Cooler Evaporator Sub-assembly
    Type
    Revolutionary super-Slim structure (RS)
    Size: W x H x L
    mm (in.)
    199.3 x 231 x 38 (7.8 x 9.1 x 1.5)
    Fin Pitch
    mm (in.)
    2.6 (0.1)
    Compressor with Pulley Assembly
    Type
    5SE11
    Pulley
    Damper Limiter (DL)
    Refrigerant
    Type
    R134a
    Charge Volume
    g
    360+/-30
    Clean Air Filter
    High Efficiency Type