BODY STRUCTURE (for Sedan) > GENERAL |
| OUTLINE |
Lightweight and Highly Rigid Body
High strength sheet steel is used in order to realize excellent body rigidity and a lightweight body.
Safety Features
The impact absorbing structure can effectively help reduce the impact in the event of a front or side collision. This structure also realizes high-performance occupant protection through the use of reinforcement and member that help minimize cabin deformation.
Rust-resistant Body
Rust-resistant performance is ensured by the extensive use of anti-corrosion sheet steel, as well as by an anti-corrosion treatment which includes the application of anti-rust wax, sealer and anti-chipping paint.
Low Vibration and Low Noise Body
Effective application of vibration damping and noise suppressant materials reduces engine noise and road noise.
| MAIN FEATURES |
Exterior Design (Front View)
The front design gives a sharp and sporty impression through the use of a bumper surface composition with volume and fender lines with an integrated look with the headlights.
The round front fog lights in the sides of the front bumper are provided.

Exterior Design (Side View)
The relaxed cabin that expresses the spacious interior realizes a side design with a lively proportion in spite of its compact size.
The combination of continuous convex and concave surfaces on the door realizes an accentuated, powerful surface shape.

Exterior Design (Rear View)
The rear design gives a wide and stable impression through the use of the rear combination lights located at the corners, the shape of the trunk opening above the bumper, and the shape of the lower part of the bumper.
