EXHAUST SYSTEM (for Hatchback) > DETAILS |
| CONSTRUCTION |
Exhaust Manifold
The exhaust manifold is made of stainless steel to reduce their weight and improve rust resistance.
The cooling holes have been provided on the No. 1 exhaust manifold heat insulator to cool down the exhaust manifold surface temperature, improving the durability.

| *1 | Exhaust Manifold | *2 | No. 1 Exhaust Manifold Heat Insulator |
| *a | Cooling Hole | - | - |
Exhaust Pipe
The exhaust pipe is made of stainless steel in order to reduce the weight, improve the rust resistance, and enhance the TWC warm-up capability.
2 TWCs are provided at the front of the front exhaust pipe assembly.
Ball joint are used to joint the exhaust manifold to the front exhaust pipe assembly, and the front exhaust pipe assembly to the tail exhaust pipe assembly. As a result, a simple construction and improved reliability have been realized.

| *1 | Gasket | *2 | TWC |
| *3 | Front Exhaust Pipe Assembly | *4 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Portion | - | - |