AIR CONDITIONING SYSTEM (for Hatchback) > GENERAL



OUTLINE
  1. Manual air conditioning system is used.

  2. A Positive Temperature Coefficient (PTC) heater control is provided. This improves heating performance.


SPECIFICATION
  1. Performance

    Destination
    U.S.A.
    Canada
    Heater
    Heater Output
    W
    4800 / 4900*
    4900
    Air Flow Volume
    m3/h
    300 / 310*
    310
    Power Consumption
    W
    200
    ←
    Cooler
    Cooling Capacity
    W
    4570
    ←
    Air Flow Volume
    m3/h
    465
    ←
    Power Consumption
    W
    245
    ←

    1. *: Cold area specification models

  2. Ventilation and Heater Radiator Unit Sub-assembly

    Destination
    U.S.A.
    Canada
    Heater Radiator Unit Sub-assembly
    Type
    Straight Flow Aluminum (SFA)-II
    ←
    Size: W x H x L
    mm (in.)
    201.5 x 140 x 27 (7.9 x 5.5 x 1.1)
    ←
    Fin Pitch
    mm (in.)
    1.8 (0.07)
    ←
    Blower with Fan Motor Sub-assembly
    Motor Type
    K70-10T
    ←
    Fan Type
    Semi Sirocco
    ←
    Fan Size: Dia. x H
    mm (in.)
    145 x 65 (5.7 x 2.6)
    ←

  3. Air Conditioning

    Destination
    U.S.A.
    Canada
    Cooler Condenser Assembly
    Type
    Multi-Flow (MF)-IV (Sub Cool)
    ←
    Size: W x H x L
    mm (in.)
    520 x 325.4 x 16 (20.5 x 12.8 x 0.6)
    ←
    Fin Pitch
    mm (in.)
    2.75 (0.1)
    ←
    No. 1 Cooler Evaporator Sub-assembly
    Type
    Revolutionary super-Slim structure (RS)
    ←
    Size: W x H x L
    mm (in.)
    199.3 x 231 x 38 (7.8 x 9.1 x 1.5)
    ←
    Fin Pitch
    mm (in.)
    2.6 (0.1)
    ←
    Compressor with Pulley Assembly
    Type
    5TSE10C
    ←
    Pulley
    Damper Limiter (DL)
    ←
    Refrigerant
    Type
    HFC134a
    ←
    Charge Volume
    g
    360+/-30
    ←
    Clean Air Filter
    High Efficiency Type
    ←


MAIN FEATURES
  1. The air conditioning system has the following features:

    Item
    Outline
    High Performance
    1. A high efficiency type clean air filter is used as the clean air filter.
    2. The Positive Temperature Coefficient (PTC) heater control is used. This system contains a PTC heater (quick hater assembly) that heats the air that has passed through the heater radiator unit sub-assembly to ensure proper heater performance.*
    Compact
    A semi-center location air conditioning unit in which the No. 1 cooler evaporator sub-assembly, heater radiator unit sub-assembly and PTC heater (quick hater assembly)* are placed in the vehicle's longitudinal direction is used.
    Others
    1. The following parts are used to ensure high cooling or heating performance while realizing a compact and lightweight construction.
      1. Revolutionary super-Slim structure (RS) type No. 1 cooler evaporator sub-assembly
      2. Straight Flow Aluminum (SFA)-II type heater radiator unit sub-assembly
      3. Multi-Flow (MF)-IV type cooler condenser assembly.
      4. Continuously variable capacity type compressor with pulley assembly (5TSE10C type)

    1. *: Models with PTC heater