SEAT ASSEMBLY (for Hatchback) > DETAILS



FUNCTION


  1. Whiplash Reducing Structure



    1. A structure, which provides support for the whole area from the head to the waist at the same time during a collision while providing a thick seat back pad, is used to help reduce whiplash injury.


      Y111898E01


      Text in Illustration 
      *1
      Seat Back Side Frame
      -
      -
      V100135
      Impact Direction (Downward Force Acting from Center of Back to Waist)
      V100136
      Impact Direction (Downward Force Acting on Upper Back)



    2. The side frame shape of the seat back assembly has been made highly rigid. As a result, the seat back assembly can support passengers to prevent them from falling backward in a collision.


      Y111899E01


      Text in Illustration 
      *1
      Seat Back Side Frame
      -
      -



  2. Manual Lifter

    1. The front seat uses a manual lifter. The entire seat can be vertically moved by operating the vertical adjusting handle on the outer surface of the front seat cushion.



    2. The manual lifter consists of the vertical adjusting handle, lifter gear and lifter rod, thus accommodating various body types.


      Y111900E01


      Text in Illustration 
      *1
      Lifter Rod
      *2
      Lifter Gear
      *3
      Vertical Adjusting Handle
      -
      -



  3. Walk-in Mechanism with Memory Function

    1. A memory function that returns the seat to the position where it was before siding has been incorporated in the walk-in mechanism that tilts and slides the front passenger seat forward for rear seat passengers to help them easily get in and out the vehicle.



    2. The seat back can be made to tilt and slide forward by pulling up the lever located on the seat shoulder, improving ease of operation.


      Y111907E01


      Step
      Operation
      *a
      Pull up the lever.
      *b
      The seat back tilts forward.
      *c
      The seat slides forward to provide a walk-in space.
      *d
      Slide the seat rearward and it stops itself at the original position.


CONSTRUCTION


  1. Front Seat

    1. Manually adjustable front seats have been provided.



    2. The front seat back has been scooped out and made slim to offer additional knee room for rear passengers.


      Y111902E01


      Text in Illustration 
      *a
      New Models
      *b
      Conventional Models
      V100145
      Additional Knee Room for Rear Passengers
      -
      -



  2. Rear Seat



    1. A folding function is employed in the seat back for both the 60/40 split type and the united type rear seats to improve the usability and convenience.


      Y111903E01


      Text in Illustration 
      *a
      60/40 Split Folding Rear Seat
      *b
      United Folding Rear Seat
      V100135
      Move
      -
      -



  3. Child Restraint System (CRS)

    1. CRS lower anchorages (child restraint seat anchor bracket sub-assemblies) for securing child seats have been provided behind the seat cushion of the rear seat.



    2. CRS top tether anchor bars for securing a child seat have been provided on the rear seat back frame.


      Y111904E01


      Text in Illustration 
      *1
      CRS Lower Anchorage (Child Restraint Seat Anchor Bracket Sub-assembly)
      *2
      CRS Top Tether Anchor Bracket