OCCUPANT CLASSIFICATION SYSTEM (for Hatchback) > DETAILS



FUNCTION OF MAIN COMPONENTS
  1. The main components have the following functions:

    Component
    Function
    Occupant Detection ECU
    Judges whether the front passenger seat is occupied using signals from the 2 occupant classification sensors and the front passenger seat belt buckle switch.
    Occupant Classification Sensors
    Detect distortion, and transmit signals corresponding to occupants' weights to the occupant detection ECU.
    Front Seat Inner Belt Assembly RH
    Seat Belt Buckle Switch
    Detects if the front passenger seat belt is fastened.
    Combination Meter Assembly
    SRS Warning Light
    Turns on to alert the driver when the airbag sensor assembly detects a malfunction in the airbag system.
    Telltale Light Assembly
    AIRBAG ON/OFF Indicator Lights
    1. Inform the driver whether the occupant detection ECU puts the instrument panel passenger airbag without door assembly and front seat outer belt assembly RH into an active state or inactive state.
    2. If a malfunction occurs in the occupant classification system, the AIRBAG OFF indicator light and the SRS warning light come on.


OPERATING CONDITION
  1. The front passenger SRS items and indicator lights operate as follows according to the occupant classification.

    Item
    Occupant Classification
    Adult
    Child
    Unoccupied
    Malfunction
    Instrument Panel Passenger Airbag without Door Assembly
    ○
    -
    -
    -
    SRS Seat Cushion Airbag (Front Seat Cushion Airbag Assembly) RH
    ○*
    -
    -
    -
    Front Seat Side Airbag Assembly RH
    ○
    ○
    ○
    ○
    Front Seat Outer Belt Assembly RH
    ○
    ○
    ○
    ○
    AIRBAG ON Indicator Light
    On
    Off
    Off
    Off
    AIRBAG OFF Indicator Light
    Off
    On
    On
    On

    1. ○: Enabled
    2. -: Disabled

    HINT:
    *: Not be deployed when the front passenger seat belt has been unfastened.


SYSTEM CONTROL


  1. Unoccupied Judgment

    1. In the occupant classification system, the occupant detection ECU calculates the weight of the occupant based on signals from the occupant classification sensors.

    2. When this system recognizes the occupant as a child, it disables the instrument panel passenger airbag without door assembly and the SRS seat cushion airbag (front seat cushion airbag assembly) RH.

    3. The occupant detection ECU contains criteria value "A" to judge whether the seat is being occupied by a child or a child seat in accordance with the signals from the 2 occupant classification sensors and front seat inner belt assembly RH (seat belt buckle switch), and criteria value "B" to judge whether the occupant is an adult or child (with child seat).

    4. The occupant detection ECU makes an unoccupied judgment when the judgment value is lower than criteria value "A" and the front seat inner belt assembly RH (seat belt buckle switch) is off.



    5. If the ignition switch is ON in this state, the system performs an initial check and illuminates the AIRBAG OFF indicator lights. Then, the system prohibits the deployment of the instrument panel passenger airbag without door assembly and the SRS seat cushion airbag (front seat cushion airbag assembly) RH.


      Y118346E01



  2. Child Seat or Child Judgment

    1. If the judgment value is lower than criteria value "B" and the front seat inner belt assembly RH (seat belt buckle switch) is on, the occupant detection ECU judges that a child seat is installed.

    2. If the judgment value is higher than criteria value "A", but lower than criteria value "B", and the front seat inner belt assembly RH (seat belt buckle switch) is off, the occupant detection ECU judges that the seat is being occupied by a child.



    3. When the ignition switch is ON under these conditions, the system performs an initial check and illuminates the AIRBAG OFF indicator light to indicate that the instrument panel passenger airbag without door assembly and the SRS seat cushion airbag (front seat cushion airbag assembly) RH have been deactivated.


      Y111927E02

    4. After the occupant detection ECU judges that a child seat is installed, the AIRBAG OFF indicator light does not go off unless the front seat inner belt assembly RH (seat belt buckle switch) is turned off.



  3. Adult Judgment

    1. When the judgment value is higher than criteria value "B", the occupant detection ECU judges that the seat is occupied by an adult.



    2. If the ignition switch is ON in this state, the system performs an initial check and illuminates the AIRBAG ON indicator light, indicating that the instrument panel passenger airbag without door assembly, the SRS seat cushion airbag (front seat cushion airbag assembly) RH, the front seat side airbag assembly RH and front seat outer belt assembly RH are active.


      Y111928E02

    3. After the occupant detection ECU judges that the occupant is an adult, and if the judgment value is determined as criteria value "B" or less according to occupant load movement, the ECU continues adult judgment for approximately 10 seconds before switching the child judgment.



  4. Initial Check



    1. After the ignition switch is ON, the occupant detection ECU lights up the AIRBAG ON/OFF indicator lights via airbag sensor assembly based on the timing chart below in order to check the indicator light circuits.


      Y103047E05


DIAGNOSIS
  1. If the occupant detection ECU detects a malfunction in the occupant classification system, the occupant detection ECU stores the malfunction data in memory. If the airbag sensor assembly detects a malfunction in the occupant detection ECU, the airbag sensor assembly illuminates the SRS warning light and AIRBAG OFF indicator light.

  2. The occupant detection ECU outputs 5-digit Diagnostic Trouble Codes (DTCs) to the Techstream.

  3. The 5-digit DTCs can be read after connecting the Techstream to the DLC3. For details, refer to the Repair Manual.