REAR BRAKE FLEXIBLE HOSE (for Hatchback) > INSTALLATION |
| 1. INSTALL REAR BRAKE TUBE FLEXIBLE HOSE (for Rear Disc Brake) |
Install the rear brake tube flexible hose with a new union bolt and a new gasket.
Install a new clip.
Using a union nut wrench 10 mm, install the brake tube onto the rear brake tube flexible hose while holding the rear brake tube flexible hose with a wrench.
| 2. INSTALL REAR FLEXIBLE HOSE |
Install the rear flexible hose with 2 new clips.
Using a union nut wrench 10 mm, connect the 2 brake tubes to the rear flexible hose while holding the rear flexible hose with a wrench.
| 3. BLEED BRAKE LINE |
| 4. BLEED CLUTCH LINE (for Manual Transaxle) |
| 5. INSTALL REAR WHEEL |