Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM (for Sedan)

THEFT DETERRENT SYSTEM (for Sedan) > DTC CHECK / CLEAR



CHECK DTC
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the tester ON.

  4. Enter the following menus: Body Electrical / Main Body / Trouble Codes /


DTC CLEAR
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the tester ON.

  4. Enter the following menus: Body Electrical / Main Body / Trouble Codes /

  5. Erase the DTCs.