Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER (for Sedan)

CONDENSER (for Sedan) > ON-VEHICLE INSPECTION



1. INSPECT CONDENSER ASSEMBLY
  1. If the fins of the cooler condenser assembly are dirty, clean them with water and dry them with compressed air.

    NOTICE:
    Do not damage the fins of the condenser assembly.

  1. If the fins of the cooler condenser assembly are bent, straighten them using a screwdriver or pliers.



2. CHECK CONDENSER FOR REFRIGERANT LEAKAGE
  1. Check the pipe joints for gas leakage, using a halogen leak detector.

  1. Check the tightening torque of the joints if gas leakage is detected from any pipe joints.