Home › Engine / Hybrid System › 1NZ-FE STARTING › IGNITION SWITCH (for Sedan)

IGNITION SWITCH (for Sedan) > REMOVAL



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE STEERING COLUMN COVER


E107137
  1. Turn the steering wheel to the right and remove the screw indicated in the illustration.



    A119195
  1. Turn the steering wheel to the left and remove the screw indicated in the illustration.



    E107139
  1. Remove the screw indicated in the illustration and remove the steering column cover.



3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY


A119192E01
  1. Disconnect the connector.

  1. Disengage the 2 claws and remove the ignition or starter switch assembly.