POWER DOOR LOCK CONTROL SYSTEM (for Sedan) > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH TECHSTREAM |
Connect a Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the tester on.
Enter the following menus: Body Electrical / Main Body / Utility / Customize.
Select the setting by referring to the table below.
| Display (Item) | Default | Contents | Setting |
| UNLK/KEY TWICE | ON | Unlocks only driver side door when driver side door key cylinder turned to unlock once, and unlocks all doors when turned to unlock twice. For OFF setting, turning it once unlocks all doors | ON/OFF |