Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW REGULATOR MOTOR (for Hatchback Front Door)

POWER WINDOW REGULATOR MOTOR (for Hatchback Front Door) > INSPECTION



1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH


    B171738E14
  1. Apply battery voltage to the motor connector according to the table below.
    Text in Illustration 
    *1
    Motor Gear
    *a
    Component without harness connected
    (Power Window Regulator Motor Assembly RH)
    *b
    Clockwise
    *c
    Counterclockwise

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    Motor gear rotates clockwise
    Battery positive (+) → 2
    Battery negative (-) → 1
    Motor gear rotates counterclockwise

    If the result is not as specified, replace the power window regulator motor assembly.



2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH


    B171735E10
  1. Apply battery voltage to the motor connector according to the table below.
    Text in Illustration 
    *1
    Motor Gear
    *a
    Component without harness connected
    (Power Window Regulator Motor Assembly LH)
    *b
    Counterclockwise
    *c
    Clockwise

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 2
    Battery negative (-) → 1
    Motor gear rotates clockwise
    Battery positive (+) → 1
    Battery negative (-) → 2
    Motor gear rotates counterclockwise

    If the result is not as specified, replace the power window regulator motor assembly.