Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT (for Sedan)

BLOWER UNIT (for Sedan) > REASSEMBLY



1. INSTALL CLEAN AIR FILTER


I101214
  1. Install the clean air filter into the blower assembly.

    NOTICE:
    Install the clean air filter with its UP mark oriented in the correct direction.



2. INSTALL AIR FILTER CASE


I101212E01
  1. Insert the rib of the air filter case into the blower assembly.

    NOTICE:
    Install the air filter case with its UP mark oriented in the correct direction.

  1. Pinch portion A to engage the claw and install the air filter case.



3. INSTALL BLOWER RESISTOR


I101599
  1. Install the blower resistor with the 2 screws.



4. INSTALL BLOWER MOTOR


I101208
  1. Install the blower motor with the 3 screws.



5. INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY


I101207
  1. Engage the 3 claws and install the air inlet damper control cable.



6. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY


I102600
  1. Engage the 2 claws and install the air duct.