ANTI-LOCK BRAKE SYSTEM (for Sedan) > CHECK FOR INTERMITTENT PROBLEMS |
| CHECK FOR INTERMITTENT PROBLEMS |
Turn the ignition switch off and connect the Techstream to the DLC3.
Turn the ignition switch to ON. Follow the directions on the Techstream to display the Data List and select areas where momentary interruption should be monitored.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| FR Speed Open | FR speed sensor open detection / Error or Normal | Error: Momentary interruption Normal: Normal | - |
| FL Speed Open | FL speed sensor open detection / Error or Normal | Error: Momentary interruption Normal: Normal | - |
| RR Speed Open | RR speed sensor open detection / Error or Normal | Error: Momentary interruption Normal: Normal | - |
| RL Speed Open | RL speed sensor open detection / Error or Normal | Error: Momentary interruption Normal: Normal | - |
While observing the screen, gently jiggle the connector or wire harness between the ECU and sensors, or between ECUs.
| SYMPTOM SIMULATION |