Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL (for Sedan)

AIR CONDITIONING PANEL (for Sedan) > INSTALLATION



1. CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY


I102570
  1. Engage the 2 claws and connect the air inlet damper control cable.



2. CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY


I102569
  1. Engage the 2 claws and connect the defroster damper control cable.



3. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY


I102568
  1. Engage the 2 claws and connect the air mix control cable clamp.

  1. Connect the air mix damper control cable to the clamp.



4. INSTALL AIR CONDITIONING PANEL ASSEMBLY


I102567
  1. Connect the 3 connectors and the 4 clamps.



    I102566
  1. Engage the 4 clips and 2 claws and install the air conditioning panel.



5. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY


B132395
  1. Engage the 4 clips and 2 claws and install the instrument cluster finish panel.



6. INSTALL INSTRUMENT CLUSTER FINISH PANEL NO.1


E116833
  1. Fit the 2 claws of the instrument cluster finish panel into the upper instrument cluster finish panel center.



    E116834
  1. Engage the 5 claws and 5 clips and install the instrument cluster finish panel.



7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


B132318
  1. Engage the 6 claws and 3 clips and install the instrument panel finish panel end RH.



8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


B132317
  1. Engage the 6 claws and 3 clips and install the instrument panel finish panel end LH.



9. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER CENTER


B132316
  1. Engage the 2 claws and 2 clips and install the instrument panel finish panel lower center.