Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL (for Sedan)

AIR CONDITIONING PANEL (for Sedan) > REMOVAL



1. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER


B132316
  1. Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.



2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


B132317
  1. Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end LH.



3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH


B132318
  1. Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end RH.



4. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1


E116832
  1. Disengage the 7 claws and 5 clips and remove the instrument cluster finish panel.



5. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY


B132395
  1. Disengage the 2 claws and 4 clips and remove the instrument cluster finish panel center.



6. REMOVE AIR CONDITIONING PANEL ASSEMBLY


I102566
  1. Disengage the 4 clips and 2 claws and remove the air conditioning panel.



    I102567
  1. Disconnect the 3 connectors and 4 clamps.



7. DISCONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY


I102568
  1. Disconnect the air mix damper control cable from the clamp.

  1. Disengage the 2 claws and disconnect the air mix damper control cable.



8. DISCONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY


I102569
  1. Disengage the 2 claws and disconnect the defroster damper control cable.



9. DISCONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY


I102570
  1. Disengage the 2 claws and disconnect the air inlet damper control cable.