Home › Vehicle Interior › DOOR LOCK › KEY REMINDER WARNING SYSTEM (for Hatchback)

KEY REMINDER WARNING SYSTEM (for Hatchback) > CUSTOMIZE PARAMETERS



CUSTOMIZING WITH THE TECHSTREAM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the Techstream on.

  4. Enter the following menus: Body Electrical / Combination Meter / Utility / Customize / Warning.

  5. Select the setting by referring to the table below.

    Warning 
    Display
    Default
    Function
    Setting
    Relevant ECU
    Key Remind Sound
    Slow
    Function to change cycle of the key reminder warning buzzer.
    Normal, Slow or Fast
    Combination meter assembly