DTC U0073 Control Module Communication Bus OFF |
| DTC NO. | DTC Detection Condition | Trouble Area |
| U0073 | When either of the following is detected:
| CAN communication system |
| 1.RECONFIRM DTC |
Clear the DTC (Click here).
Turn the ignition switch off.
Start the engine.
Drive the vehicle and turn the steering wheel to the right and left at a speed of 15 km/h (9 mph) or more.
Check for DTCs (Click here).
| Result | Proceed to |
| DTC (relating to CAN communication system) is output | A |
| DTC (relating to ABS system) is output | B |
| DTC is not output | C |
|
| ||||
|
| ||||
| A | ||
| ||