Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM (for Sedan)

WIPER AND WASHER SYSTEM (for Sedan) > PRECAUTION



1.WASHER NOZZLE ADJUSTMENT PRECAUTION
  1. Do not clean or adjust the washer nozzle using objects such as needles or safety pins, because;

    1. The washer nozzle tip is made of resin and could be damaged.

    2. Adjustment is not necessary as the washer nozzle is a spray type.

  2. If the washer nozzle is clogged with substances such as car wax, remove it and clean the nozzle hole with a soft resin brush or similar tool.