Component
| Outline
|
Transponder key coil/amplifier
| When key is inserted in ignition key cylinder, key coil receives key code. Then amplifier amplifies ID code and outputs it to transponder key ECU assembly.
|
Unlock warning switch assembly
| Detects if key is in ignition key cylinder and outputs results to transponder key ECU assembly.
|
ECM
| Through SFI communication, ECM receives ID verification results from transponder key ECU assembly. ECM also verifies ECUs. Then judges whether or not to enter immobiliser engine mode.
|
Security indicator light
| Depending on operation of transponder key ECU, interior security indicator light comes on or starts blinking.
|