Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER RESISTOR (for Sedan)

BLOWER RESISTOR (for Sedan) > INSPECTION



1. INSPECT BLOWER RESISTOR


E032877E03
  1. Measure the resistance.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 - 4
    3.12 to 3.60 Ω
    3 - 4
    1.45 to 1.67 Ω
    2 - 4
    0.52 to 0.60 Ω

    If the resistance value is not as specified, replace the blower resistor.