SPEED SENSOR (for Sedan) > INSTALLATION |
| 1. INSTALL SPEED SENSOR |
![]() |
Coat a new O-ring with ATF and install it onto the speed sensor.
![]() |
Install the speed sensor to the transaxle with the bolt.
Connect the speed sensor connector.
| 2. INSTALL SPEEDOMETER SENSOR |
![]() |
Coat a new O-ring with ATF and install it onto the speedometer sensor.
Install the speedometer driven gear into the speedometer sensor with the clip.
![]() |
Install the speedometer sensor to the transaxle with the bolt.
Connect the speedometer sensor connector.
| 3. INSTALL BATTERY CARRIER |
Install the battery carrier with the 5 bolts.
Install the clamp.
| 4. INSTALL BATTERY TRAY |
| 5. INSTALL BATTERY |
Install the battery onto the vehicle with the battery clamp.
Connect the cable to the battery terminal.