Home › Drivetrain ยท U340E AUTOMATIC TRANSMISSION / TRANSAXLE › SPEED SENSOR (for Hatchback)

SPEED SENSOR (for Hatchback) > REMOVAL



1. REMOVE BATTERY


    A248909
  1. Disconnect the cable from the battery terminal.

  1. Loosen the 2 nuts and remove the battery clamp.

  1. Remove the battery.



2. REMOVE BATTERY TRAY


3. REMOVE BATTERY CARRIER


    A259809
  1. Disengage the 6 clamps and disconnect the wire harness from the battery carrier.

  1. Remove the 5 bolts and the battery carrier.



4. REMOVE TRANSMISSION REVOLUTION SENSOR


    C117098
  1. Disconnect the transmission revolution sensor connector.

  1. Remove the bolt and the transmission revolution sensor from the automatic transaxle assembly.



    C117099E01
  1. Remove the O-ring from the transmission revolution sensor.
    Text in Illustration 
    *1
    O-ring