Home › Drivetrain ยท U340E AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH (for Sedan)

PARK / NEUTRAL POSITION SWITCH (for Sedan) > ADJUSTMENT



1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


C117107E01
  1. Loosen the bolt of the park/neutral position switch and move the shift lever to the N position.



    C117107E02
  1. Align the groove with the neutral basic line.



    C117107E01
  1. Hold the switch in position and tighten the 2 bolts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. After the adjustment, perform the switch operation check.