SHIFT LEVER (for Sedan) > DISASSEMBLY |
| 1. REMOVE SHIFT LEVER CAP |
![]() |
Remove the shift lever cap from the position indicator housing upper.
| 2. REMOVE UPPER POSITION INDICATOR HOUSING |
![]() |
Release the 4 claws using a screwdriver and remove the upper position indicator housing from the shift lock control unit.
| 3. REMOVE NO. 2 CONTROL POSITION INDICATOR PLATE |
![]() |
Release the 2 claws using a screwdriver and remove position indicator plate from the upper position indicator housing.
| 4. REMOVE POSITION INDICATOR SLIDE COVER |
![]() |
Remove the position indicator slide cover from the shift lock control unit.
| 5. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER |
![]() |
Remove No. 2 position indicator slide cover from the position indicator slide cover.
| 6. REMOVE SHIFT LOCK RELEASE BUTTON |
![]() |
Remove the shift lock release button and shift lock release spring from the shift lock control unit.
| 7. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY |
![]() |
Remove the indicator light wire sub-assembly from the shift lock control unit.