Home › Drivetrain ยท U340E AUTOMATIC TRANSMISSION / TRANSAXLE › DIFFERENTIAL OIL SEAL (for Hatchback)

DIFFERENTIAL OIL SEAL (for Hatchback) > REPLACEMENT

for Preparation Click here



1. REMOVE FRONT DRIVE SHAFT ASSEMBLY
(Click here)


2. REMOVE FRONT TRANSAXLE CASE OIL SEAL


C117109E02
  1. Using SST, remove the front transaxle case oil seal.

    SST
    09308-00010  



3. REMOVE TRANSAXLE CASE OIL SEAL


C117108E02
  1. Using SST, remove the transaxle case oil seal.

    SST
    09308-00010  



4. INSTALL FRONT TRANSAXLE CASE OIL SEAL
  1. Coat the lip of a new front transaxle case oil seal with MP grease.



    C157429E02
  1. Using SST and a hammer, install the front transaxle case oil seal.

    SST
    09554-14010  
    09950-70010   (09951-07200)

    Drive in depth:
    1.5 to 2.5 mm (0.0591 to 0.0984 in.)

    NOTICE:
    Do not damage the oil seal lip.



5. INSTALL TRANSAXLE CASE OIL SEAL
  1. Coat the lip of a new transaxle case oil seal with MP grease.



    C157430E02
  1. Using SST and a hammer, install the transaxle case oil seal.

    SST
    09710-20011   (09710-06071)
    09950-70010   (09951-07200)

    Drive in depth:
    5.4 to 6.4 mm (0.213 to 0.252 in.)

    NOTICE:
    Do not damage the oil seal lip.



6. INSTALL FRONT DRIVE SHAFT ASSEMBLY
(Click here)