Home › Drivetrain ยท U340E AUTOMATIC TRANSMISSION / TRANSAXLE › OIL PUMP (for Hatchback)

OIL PUMP (for Hatchback) > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT OIL PUMP BODY O-RING


C067790E04
  1. Remove the front oil pump body O-ring from the front oil pump body.



2. REMOVE STATOR SHAFT ASSEMBLY


C067789E04
  1. Using "TORX" socket wrench T30, remove the 10 "TORX" screws and the stator shaft assembly.



3. REMOVE FRONT OIL PUMP DRIVE GEAR


C069210E03
  1. Remove the front oil pump drive gear from the front oil pump body.



4. REMOVE FRONT OIL PUMP DRIVEN GEAR


C069211E02
  1. Remove the front oil pump driven gear from the front oil pump body.



5. REMOVE FRONT OIL PUMP OIL SEAL


C067796E02
  1. Using SST, remove the front oil pump oil seal from the front oil pump body.

    SST
    09308-00010  



6. REMOVE CLUTCH DRUM OIL SEAL RING


C067798E01
  1. Using a screwdriver, remove the 2 clutch drum oil seal rings from the stator shaft assembly.