Home › Drivetrain ยท U340E AUTOMATIC TRANSMISSION / TRANSAXLE › VALVE BODY ASSEMBLY (for Sedan)

VALVE BODY ASSEMBLY (for Sedan) > REASSEMBLY



1. INSTALL MANUAL VALVE


C067910
  1. Coat the manual valve with Toyota Genuine ATF WS or equivalent, and install it onto the valve body.



2. INSTALL NO. 3 SOLENOID LOCK PLATE


C125246E01
  1. Install the shift solenoid valve SLT onto the valve body.

  1. Install the solenoid lock plate onto the shift solenoid valve SLT.

  1. Install the shift solenoid valve ST onto the valve body.

  1. Install the No. 3 solenoid lock plate onto the valve body with the 2 bolts.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }



3. INSTALL SHIFT SOLENOID VALVE SLU


C121643E01
  1. Install the shift solenoid valve SLU onto the valve body.

  1. Install the solenoid lock plate with the bolt.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }



4. INSTALL SHIFT SOLENOID VALVE S2


C067908
  1. Install shift solenoid valve S2 with the bolt.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }



5. INSTALL SHIFT SOLENOID VALVE S1


C067907
  1. Install shift solenoid valve S1 with the bolt.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }