LUGGAGE DOOR HINGE TORSION BAR (for Sedan) > REMOVAL |
| 1. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH |
Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support.
![]() |
Using SST, disconnect the left end of the luggage door hinge torsion bar LH from the luggage door hinge and the vehicle body as shown in the illustration.
![]() |
Disconnect the right end of the luggage door hinge torsion bar LH and remove it from the vehicle body as shown in the illustration.
| 2. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH |
Use the same procedure as for the LH side.