SHIFT AND SELECT LEVER SHAFT (for Sedan) > REASSEMBLY |
| 1. INSTALL SELECT SPRING NO.1 SEAT SHAFT SNAP RING |
![]() |
Coat the shift and select lever shaft with MP grease, and install a snap ring onto the shift and select lever shaft using a brass bar and a hammer.
| 2. INSTALL SELECT INNER LEVER |
![]() |
Coat select spring seat No. 1 with MP grease.
Using a pin punch (φ5 mm) and a hammer, install select spring seat No. 1, select return compression spring No. 1, the select inner lever and select inner lever slotted spring pin onto the shift and select lever.
| 3. INSTALL SHIFT LEVER INNER NO.1 |
![]() |
Coat the shift inter lock plate and shift lever inner No. 1 with MP grease.
Using a pin punch (φ5 mm) and a hammer, install the shift inter lock plate, shift lever inner No. 1 and shift inner lever slotted spring pin onto the shift and select lever shaft.
| 4. INSTALL SHIFT LEVER INNER NO.2 |
![]() |
Coat shift lever inner No. 2 with MP grease.
Using a pin punch (φ5 mm) and a hammer, install shift lever inner No. 2 and shift inner lever slotted spring pin onto the shift and select lever shaft.
| 5. INSTALL SELECT SPRING SEAT NO.2 |
![]() |
Coat select spring seat No. 2 with MP grease.
Install select spring seat No. 2 and select return compression spring No. 2. Using pliers, install a new select spring seat No. 2 E-ring onto the shift and select lever shaft.