Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER (for Sedan)

REAR SHOCK ABSORBER (for Sedan) > REMOVAL



1. REMOVE REAR WHEEL


2. REMOVE REAR SHOCK ABSORBER
  1. Pull the rear seatback lock release button and tilt the rear seatback forward.



    C288463E01
  1. Support the rear axle beam with a jack. Insert a wooden block between the jack and the rear axle spring seat to prevent damage.
    Text in Illustration 
    *a
    Wooden Block
    *b
    Jack



    C106030
  1. Remove the 2 nuts while keeping the rear shock absorber piston rod from rotating.

  1. Remove the rear shock absorber cushion retainer and the rear suspension support.



    C106031
  1. Remove the bolt while keeping the nut from rotating and remove the rear shock absorber.

    NOTICE:
    Since a stopper nut is used, turn the bolt.



3. REMOVE REAR SUSPENSION SUPPORT STOPPER


4. REMOVE REAR SUSPENSION SUPPORT ASSEMBLY