REAR SHOCK ABSORBER (for Hatchback) > REMOVAL |
| 1. REMOVE REAR WHEEL |
| 2. REMOVE REAR ABSORBER CAP |
| 3. REMOVE REAR SHOCK ABSORBER ASSEMBLY |
Support the rear axle beam assembly with a jack. Insert a wooden block between the jack and the rear axle spring seat to prevent damage.
![]() |
Remove the 2 nuts while keeping the piston rod from rotating.
Remove the rear shock absorber cushion retainer and rear suspension support.
![]() |
Remove the bolt while keeping the nut from rotating and remove the rear shock absorber assembly.
| 4. REMOVE REAR SUSPENSION SUPPORT STOPPER |
| 5. REMOVE REAR SUSPENSION SUPPORT ASSEMBLY |