POWER STEERING SYSTEM (for Hatchback) > FAIL-SAFE CHART |
| DTC No. | Malfunction | Fail-safe |
| C1511 C1512 C1513 C1514 C1516 C1517 | Torque sensor malfunction | Power assist stopped |
| C1524 | Motor malfunction | Power assist stopped |
| C1531 C1532 | Power steering ECU malfunction | Power assist stopped |
| C1533 | Temperature sensor malfunction in power steering ECU | Assist force restricted |
| C1534 | EEPROM abnormal | Controlled using current default map |
| C1535 | Steering wheel location data error | Power assist stopped |
| C1541*1 | Vehicle speed signal error | Assist force restricted |
| C1542*1 | ||
| C1551 | IG power source voltage error | Assist force restricted |
| C1552 | PIG power source voltage error | Assist force restricted |
| C1553 | Overvoltage at IG and PIG terminals | Assist force restricted |
| C1554 | Power source relay malfunction | Power assist stopped |
| C1555 | Motor relay malfunction | Power assist stopped |
| C1581 | Assist Map Number Un-Writing | Power assist permitted using default value |
| C1582 | Assist Map Number Mismatch | Control is performed using the current assist map. |
| U0100 | ECM communication error | Amount of power assist remains constant at speed of 70 Km/h (43 mph) |
| U0129 | Skid control ECU communication error | Amount of power assist remains constant at speed of 70 Km/h (43 mph) |
| - | Extremely high temperature in ECU | Assist force restricted until normal ECU temperature recovers |
| - | Power source voltage drop | Assist force suspended until voltage recovers |