Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR (for Hatchback)

FRONT STABILIZER BAR (for Hatchback) > REMOVAL



1. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY
(Click here)


2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    C235026
  1. Remove the nut and separate the front stabilizer link assembly from the front shock absorber.

    HINT:
    Using a socket hexagon wrench 6 mm to hold the stud.



3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:
Use the same procedure for the RH side as for the LH side.



4. REMOVE MANUAL STEERING GEAR


    C244486
  1. Remove the 2 bolts, 2 nuts and the manual steering gear from the front suspension crossmember.

    NOTICE:
    Keep the nut from rotating while turning the bolt.



5. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    C237197
  1. Remove the 2 bolts and the front No. 1 stabilizer bracket LH.



6. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

HINT:
Use the same procedure for the RH side as for the LH side.



7. REMOVE FRONT STABILIZER BAR


8. REMOVE FRONT NO. 1 STABILIZER BAR BUSH
  1. Remove the 2 front No. 1 stabilizer bar bushes from the front stabilizer bar.