Home › Drivetrain ยท C50 MANUAL TRANSMISSION / TRANSAXLE › SHIFT LEVER ASSEMBLY (for Sedan)

SHIFT LEVER ASSEMBLY (for Sedan) > REMOVAL



1. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER


B132316
  1. Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.



2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B132387
  1. Remove the shift lever knob.



3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    B132347
  1. Shift the shift lever into the N position.

  1. Disengage the 5 clips and the claw and remove the upper console panel.



4. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B132348
  1. Disengage the 3 clips and 3 claws.

  1. Disconnect the connector and remove the console upper rear panel.



5. REMOVE CONSOLE BOX CARPET


B132346
  1. Remove the console box carpet.



6. REMOVE REAR CONSOLE BOX ASSEMBLY


    B132349
  1. Disconnect the clamp.

  1. Remove the 2 bolts and 2 screws.

  1. Disengage the 4 claws and remove the rear console box.



7. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
  1. Remove the clip and disconnect the control select cable from the shift lever.

  1. Turn the lock to release it and separate the control select cable from the shift lever retainer.

  1. Disconnect the control shift cable from the shift lever.

  1. Turn the lock to release it and separate the control shift cable from the shift lever retainer.



8. REMOVE FLOOR SHIFT SHIFT LEVER ASSEMBLY


C106358
  1. Remove the 4 bolts and remove the shift lever.