Home › Engine / Hybrid System › 1NZ-FE EMISSION CONTROL › PCV VALVE (for Sedan)

PCV VALVE (for Sedan) > INSPECTION



1. INSPECT VENTILATION VALVE SUB-ASSEMBLY


A115397
  1. Install the hose onto the ventilation valve sub-assembly.



  1. Check the ventilation.

    1. Check the ventilation when air is applied from the cylinder head side.

      Standard:
      Air flows.

      CAUTION:
      Do not inhale the air from the ventilation valve because it is harmful.



    2. A115398
    3. Check the ventilation when air is applied from the intake manifold side.

      Standard:
      Air does not flow.

      If the ventilation is not as specified, replace the ventilation valve sub-assembly.

  1. Remove the hose from the ventilation valve sub-assembly.