Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Sedan)

AIR CONDITIONING SYSTEM (for Sedan) > DTC CHECK / CLEAR



CHECK DTC
  1. Connect a Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the tester on.

  4. Enter the following menus: Body Electrical / Air conditioner / Trouble Codes /

  5. Read the DTCs.


CLEAR DTC
  1. Connect a Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the tester on.

  4. Enter the following menus: Body Electrical / Air conditioner / Trouble Codes /

  5. Erase the DTCs.