Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (for Sedan)

CAN COMMUNICATION SYSTEM (for Sedan) > FAIL-SAFE CHART



FAIL-SAFE FUNCTION
  1. When communication fails in any of the CAN bus lines (communication lines) due to a short circuit or other causes, the fail-safe function, which is specified for each system, operates to prevent the system from malfunctioning.

  2. Relationships between components and system functions and effects of communication failure on these functions. (For further details, see the pages for each system.)

    Function
    ECM
    Brake Actuator (Skid Control ECU)*1
    Condition when communication impossible
    DTC detection (Driver detectable)
    ABS control (Controls driving force while ABS in operation):*1
    ○
    ●
    Control inoperative (Gradually stops controlling during ABS control)
    Detectable (Light comes on)
    Electric power steering (Outputs assist current)
    ○
    ○
    Steering assist force is maintained at the level for about 70 km/h (43.5 mph)
    Detectable (Light comes on)
    Event recorder
    (Tracks event data such as vehicle speed and accelerator opening angle and records data)
    ○

    Data not recorded
    None
    Air conditioning control*2
    ○

    Air conditioning function stops
    None (Air conditioning inoperative)
    Meter Display (Displays operation condition and DTCs)
    ○
    ○
    Light does not come on, illuminates abnormally, or blinks abnormally
    Detectable (Abnormal display)
    Buzzer control
    ○

    Buzzer function stops
    None (Light comes on)
    Illumination control


    Light illumination rheostat inoperative
    None (Rheostat inoperative)
    Power door lock control
    ○

    Unlock permitted
    None (Wireless door lock operation)
    *1: w/ ABS
    *2: w/ Air Conditioning

    HINT:
    1. ●: Control master
    2. ○: System related


    Function
    Power Steering ECU
    Center Airbag Sensor Assembly
    Air Conditioning Amplifier*2
    Combination Meter ECU
    Main Body ECU
    Condition when communication impossible
    DTC detection (Driver detectable)
    ABS control (Controls driving force while ABS in operation)*1





    Control inoperative (Gradually stops controlling during ABS control)
    Detectable (Light comes on)
    Electric power steering (Outputs assist current)
    ●




    Steering assist force is maintained at the level for about 70 km/h (43.5 mph)
    Detectable (Light comes on)
    Event recorder
    (Tracks event data such as vehicle speed and accelerator opening angle and records data)

    ●

    ○

    Data not recorded
    None
    Air conditioning control*2


    ●
    ○

    Air conditioning function stops
    None (Air conditioning inoperative)
    Meter Display (Displays operation condition and DTCs)
    ○
    ○

    ●
    ○
    Light does not come on, illuminates abnormally, or blinks abnormally
    Detectable (Abnormal display)
    Buzzer control



    ●
    ○
    Buzzer function stops
    None (Light comes on)
    Illumination control



    ○
    ●
    Light illumination rheostat inoperative
    None (Rheostat inoperative)
    Power door lock control

    ○

    ○
    ●
    Unlock permitted
    None (Wireless door lock operation)
    *1: w/ ABS
    *2: w/ Air Conditioning

    HINT:
    1. ●: Control master
    2. ○: System related