Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM (for Sedan)

LIGHTING SYSTEM (for Sedan) > TERMINALS OF ECU



CHECK MAIN BODY ECU

E114510E74


B108641E70

  1. Disconnect the 4B and 4E main body ECU connectors.

  2. Measure the resistance and voltage between each terminal of the wire harness side connectors and body ground.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    4B-30 (BECU) - Body ground
    L - Body ground
    Battery power supply
    Always
    11 to 14 V
    4E-17 (GND1) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    If the result is not as specified, there may be a malfunction on the wire harness side.