Home › Engine / Hybrid System › 1NZ-FE LUBRICATION › OIL PUMP (for Hatchback)

OIL PUMP (for Hatchback) > REASSEMBLY



1. INSTALL OIL PUMP RELIEF VALVE
  1. Mount the oil pump cover in a vise between aluminum plates.



    A116562E01
  1. Coat the oil pump relief valve with engine oil and insert the oil pump relief valve and the oil pump relief valve spring into the oil pump cover.
    Text in Illustration 
    *1
    Oil Pump Relief Valve Plug
    *2
    Oil Pump Relief Valve Spring
    *3
    Oil Pump Relief Valve

  1. Install the oil pump relief valve plug.

    Torque:
    25 N*m{ 255 kgf*cm , 18 ft.*lbf }



2. INSTALL OIL PUMP ROTOR SET


A117456E03
  1. Coat the oil pump rotor set with engine oil and place it into the oil pump assembly with the marks facing the oil pump cover side.
    Text in Illustration 
    *a
    Mark



3. INSTALL OIL PUMP COVER


A116560
  1. Install the oil pump cover with the 2 bolts and the 3 screws.

    Torque:
    Bolt:
    8.8 N*m{ 90 kgf*cm , 78 in.*lbf }
    Screw:
    10 N*m{ 105 kgf*cm , 8 ft.*lbf }