Home › Engine / Hybrid System › 1NZ-FE COOLING › THERMOSTAT (for Hatchback)

THERMOSTAT (for Hatchback) > INSPECTION



1. INSPECT THERMOSTAT


    P000436E01
  1. Immerse the thermostat in water and gradually heat the water.

  1. Check the valve opening temperature of the thermostat.

    Valve opening temperature:
    80 to 84°C (176 to 183°F)

    If the valve opening temperature is not as specified, replace the thermostat.



    A091454E02
  1. Check the valve lift.
    Text in Illustration 
    *a
    Valve Lift

    Valve lift:
    8.5 mm (0.335 in.) or more at 95°C (203°F)

    If the valve lift is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat is at low temperatures (below 77°C (171°F))
    If not fully closed, replace the thermostat.