THERMOSTAT (for Sedan) > REMOVAL |
| 1. DRAIN ENGINE COOLANT |
![]() |
Loosen the radiator drain cock plug.
| *1 | Water Filler Cap Sub-assembly |
| *2 | Radiator Drain Cock Plug |
Remove the water filler cap sub-assembly, then drain coolant.
| 2. REMOVE WATER INLET |
![]() |
Remove the 2 nuts and separate the water inlet with radiator hose from the cylinder block.
| 3. REMOVE THERMOSTAT |
![]() |
Remove the thermostat from the cylinder block.
Remove the gasket from the thermostat.