REAR COMBINATION LIGHT ASSEMBLY (for Sedan) > REASSEMBLY |
| 1. INSTALL BACK UP LIGHT BULB |
![]() |
Install the back up light bulb into the socket.
Turn the back up light socket, in the direction indicated by the arrow in the illustration, to install them.
| 2. INSTALL TURN SIGNAL LIGHT BULB |
![]() |
Install the turn signal light bulb into the socket.
Turn the turn signal light socket, in the direction indicated by the arrow in the illustration, to install them.
| 3. INSTALL TAIL LIGHT AND STOP LIGHT BULB |
![]() |
Install the tail light and stop light bulb into the socket.
Turn the tail light and stop light bulb socket, in the direction indicated by the arrow in the illustration, to install them.
| 4. INSTALL REAR COMBINATION LIGHT BODY GASKET |
![]() |
Install a new rear combination light body gasket.