Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY (for Sedan)

LICENSE PLATE LIGHT ASSEMBLY (for Sedan) > INSTALLATION



1. INSTALL LICENSE PLATE LIGHT ASSEMBLY


E127156
  1. Install the license plate light bulb into the light socket.

  1. Turn the license plate light bulb socket and bulb, in the directions indicated by the arrow in the illustration, to install them.



    E125504E01
  1. Engage claw A and claw B, and install the license plate light assembly.



2. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH


    E127154
  1. Engage the 3 claws and install the luggage compartment door outside garnish.



    E129670
  1. Connect the 2 connectors.

  1. Install the luggage compartment door outside garnish with the 2 nuts.

    Torque:
    4.9 N*m{ 50 kgf*cm , 43 in.*lbf }



3. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER


    E129671
  1. Install the luggage compartment door lock cylinder with the 2 nuts.

    Torque:
    4.9 N*m{ 50 kgf*cm , 43 in.*lbf }

  1. Install the luggage compartment door lock link.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }