Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY (for Sedan)

HIGH MOUNTED STOP LIGHT ASSEMBLY (for Sedan) > REMOVAL



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY


    E127158
  1. Disengage the 2 claws.



    E127159
  1. Disengage the 2 claws.

  1. Disconnect the connector and remove the high mounted stop light assembly.



3. REMOVE HIGH MOUNTED STOP LIGHT BULB


    E102241
  1. Turn the high mounted stop light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

  1. Remove the high mounted stop light bulb from the light socket.