Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT (for Sedan)

PERSONAL LIGHT (for Sedan) > INSTALLATION



1. INSTALL MAP LIGHT BULB


E113826
  1. Install the map light bulb into the light socket.

  1. Turn the map light bulb socket and bulb, in the direction indicated by the arrows in the illustration.



2. INSTALL MAP LIGHT ASSEMBLY


E114447
  1. Connect the connector.

  1. Engage the 4 claws and install the map light.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }