Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT (for Sedan)

PERSONAL LIGHT (for Sedan) > REMOVAL



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE MAP LIGHT ASSEMBLY


E114440
  1. Using a roof moulding remover, disengage the 4 claws.

  1. Disconnect the connector, and remove the map light.



3. REMOVE MAP LIGHT BULB


E113825
  1. Turn the 2 map light sockets and bulbs, in the direction indicated by the arrows in the illustration, to remove them.

  1. Remove the 2 map light bulbs from the light socket.