Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT (for Sedan)

ROOM LIGHT (for Sedan) > INSTALLATION



1. INSTALL ROOM LIGHT ASSEMBLY
  1. Install room light bulb No. 1.



    E114444
  1. Engage the 4 claws and install the room light switch base.

  1. Install the roof wire into the claw of the room light.



    E114445
  1. Engage the 4 claws and install the room light.



    B124366
  1. Engage the 4 claws and install the 2 covers.



    E114446
  1. Engage the 4 claws and install the room light lens.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }